Flood Angel Logo

Bespoke barrier protection for your apertures with made to measure solutions. Suitable for either standard inward or outward opening doors with a range of fixing systems.

Lightweight and easy to fit flood mitigation solutions for virtually any door opening.

BSI Kitemark accredited.

Flood Defender ™ Barrier – Single Door

Flood Angel® Flood Defender™ has the BSI kitemark accreditation. This superior flood defence barrier is a bespoke, made to measure product. Suitable for either standard inward or outward opening doors, the system can be produced using six different fixing systems so that it can be fitted to virtually any door opening.

  • Lightweight yet strong
  • Easy to install
  • Six different fixing systems
  • Bespoke to suit each situation
  • Virtually invisible fixings
  • Choice of heights, up to maximum 1000mm
  • 2 year manufacturer’s guarantee

All locations where flood defence products are installed can be fitted with a telemetry early warning system.

BESPOKE TO YOU

Easy fit in under 2 minutes. Peace of mind that the Flood Defender can be deployed with speed in emergency flood situations.

EASY TO INSTALL

The Flood Defender is quick and easy to install.

6 FIXING SYSTEMS

There are 6 fixing systems available for the Flood Defender.

Type A – Wall mounted barrier

Type B – Nutsert into UPVC

Type C – Nutsert into wood frame

Type D – Barrier into vertical rails

Type E – Barrier into U shaped frame

Type F — Nutsert into brick

LISTED BUILDINGS

Ideal for listed properties where permanent rails are not always acceptable to the local planning authority.

DISABLED ACCESS

Suitable for disabled access as no rails or channels are required.

CONSTRUCTION

A single-piece flood board is provided with a sealed aluminium frame for strength and top handles for ease of use. The barrier is manufactured from Polyester GRP (a material used to produce car bodies and boat hulls) which is 100% waterproof. The barrier is lightweight, and combines manageability with rigidity.

The flood board also contains extremely efficient “closed cell” EPDM rubber seals which form an effective, watertight barrier.

CERTIFICATION

BSI Kitemark licensed product (KM563624). Passed the rigorous testing criteria of PAS 1188-1:2009.

SIZE

The Flood Defender™ can be manufactured completely bespoke – up to 1000mm heights.

GUARANTEE

2 year manufacturer’s guarantee. Flood Angel Limited cannot be held responsible for incorrect deployment.

APPLICATIONS

  • To protect a standard, single or double outward or inward opening door
  • To protect a patio door or French doors
  • To span a gap within a pedestrian gateway or wall
  • To span a shop front

Flood Defender ™ Barrier – Double Door

The made to measure Flood Angel® Flood Defender™ has the BSI kitemark accreditation. Double Door Barriers are ideal for patio and French doors and are suitable for use on either standard inward or outward opening doors; the system can be produced using six different fixing systems so that it can be fitted to virtually any door opening.

  • Lightweight yet strong
  • Easy to install
  • Six different fixing systems
  • Bespoke to suit each situation
  • Virtually invisible fixings
  • Choice of heights, up to maximum 1000mm
  • 2 year manufacturer’s guarantee

All locations where flood defence products are installed can be fitted with a telemetry early warning system.

BESPOKE TO YOU

Easy fit in under 2 minutes. Peace of mind that the Flood Defender can be deployed with speed in emergency flood situations.

EASY TO INSTALL

The Flood Defender is quick and easy to install.

6 FIXING SYSTEMS

There are 6 fixing systems available for the Flood Defender.

Type A – Wall mounted barrier

Type B – Nutsert into UPVC

Type C – Nutsert into wood frame

Type D – Barrier into vertical rails

Type E – Barrier into U shaped frame

Type F — Nutsert into brick

LISTED BUILDINGS

Ideal for listed properties where permanent rails are not always acceptable to the local planning authority.

DISABLED ACCESS

Suitable for disabled access as no rails or channels are required.

CONSTRUCTION

A single-piece flood board is provided with a sealed aluminium frame for strength and top handles for ease of use. The barrier is manufactured from Polyester GRP (a material used to produce car bodies and boat hulls) which is 100% waterproof. The barrier is lightweight, and combines manageability with rigidity.

The flood board also contains extremely efficient “closed cell” EPDM rubber seals which form an effective, watertight barrier.

CERTIFICATION

BSI Kitemark licensed product (KM563624). Passed the rigorous testing criteria of PAS 1188-1:2009.

SIZE

The Flood Defender™ can be manufactured completely bespoke – up to 1000mm heights.

GUARANTEE

2 year manufacturer’s guarantee. Flood Angel Limited cannot be held responsible for incorrect deployment.

APPLICATIONS

  • To protect a standard, single or double outward or inward opening door
  • To protect a patio door or French doors
  • To span a gap within a pedestrian gateway or wall
  • To span a shop front

Flood Angel Logo

An unprotected standard airbrick could allow over 5,000 litres of water per hour to enter your property.

Stop water ingress via ordinary airbricks with automatic passive solutions.

BSI Kitemark accredited.

Anti-flood Airbrick

Available in 5 standard colours, the Flood Angel® Anti-flood Airbrick is the world’s first BSI Kitemark accredited airbrick to protect against flooding. (PAS 1188-1:2009)

It is the most efficient and effective airbrick replacement on the market. Its superior design is passive and it is self-activated by only one moving part.

Designed to replace a standard airbrick it allows air to freely pass through complying with BS493:1995, but under flood conditions its self-activating gate will automatically shut off.

A removable integral mesh prevents the ingress of insects and debris which may otherwise impinge on the moving part. This unique mesh is imperative to the efficient functioning of the airbrick.

  • Fully compliant with the Code for Sustainable Homes
  • Suitable for use in listed buildings
  • Can be retro fitted or used in new build construction
  • Made from recycled polypropylene
  • Standard colours to match exterior brickwork: terracotta, engineering blue, black, white, buff
  • 2 year manufacturer’s guarantee

All locations where flood defence products are installed can be fitted with a telemetry early warning system.

AUTO-CLOSES

The Airbrick uses the power of the flood water to close itself. Once waters subside, the Airbrick opens again.

RETRO-FIT or NEW

The Airbrick can be retro-fit or used in new build construction.

STOPS INSECTS

The integrated mesh unit stops insects and debris entering.

INSTRUCTIONS

The Flood Angel® Anti-flood Airbrick is easy to install and comes complete with full instructions.

TECHNICAL

The brick is constructed from durable materials, e.g. recycled polypropylene co-polymer with UV stabilisers against deterioration and silicone sponge. Silicone sponge has been approved by the WRAS (Water Regulations Advisory Service). The Flood Angel® Airbrick has an excellent resistance to ozone, oxidation, ultraviolet light, corona discharge, cosmic radiation, ionising temperature of -20° to 120°.

The product has a minimum geometric open area of 2400mm3 and, therefore, can contribute to meeting the ventilation opening requirements of 1500mm2 run of opposing walls or 500mm per m of floor area for suspended ground floors, whichever is greater, and 500mm per m for wall cavities.

The product, therefore, can be used to meet the relevant requirements of the national Building Regulations and home warranty providers.

CONSTRUCTION

Made of recycled polypropylene. Available in standard terracotta, engineer blue, buff and other colours available subject to a minimum order level.

CERTIFICATION

BSI Kitemark licensed product (KM563624). Passed the rigorous testing criteria of PAS 1188-1:2009.

DIMENSIONS

Length – 210mm

Height – 62mm

Depth – 73.5 mm

GUARANTEE

2 year manufacturer’s guarantee. Flood Angel Limited cannot be held responsible for incorrect self-installation.

Anti-flood Airbrick Cover

The Flood Angel® Anti-flood Airbrick Cover is BSI Kitemark accredited (PAS 1188-1:2009).

Easy to deploy and compact to store, it is produced from aluminium sheet and closed cell EPDM foam, taking only minutes to install. They are simply pushed into pre-placed fittings in the holes of the airbrick and once in place, the screws are twisted to form a tight seal.

Once flood waters subside the cover is removed by simply turning the hand wheels.

Can only be used with standard terracotta airbricks.

  • Cost effective solution to stop ingress of water
  • Takes minutes to install after first application
  • Available in single and double sizes
  • 2 year manufacturer’s guarantee
  • Available in standard terracotta; other colours available upon request
  • The anti-flood airbrick cover can also be made in bespoke sizes: please call our advice line

Without the protection of a Flood Angel Anti-flood Airbrick Cover, a regular airbrick will allow over 5000 litres of water per hour to enter a property.

All locations where flood defence products are installed can be fitted with a telemetry early warning system.

FAST TO FIT

Takes minutes to install after the first application.

COST EFFECTIVE

Cost effective solution to stop ingress of water.

CONSTRUCTION MATERIALS

It is produced from aluminium sheet and closed cell EPDM foam. The closed cell structure makes it impermeable to air and water and therefore an ideal material for sealing against air and water.

CERTIFICATION

BSI Kitemark licensed product (KM563624). Passed the rigorous testing criteria of PAS 1188-1:2009.

DIMENSIONS – SINGLE ANTI-FLOOD AIRBRICK COVER

Single Length – 225mm Height – 80mm

DIMENSIONS – DOUBLE ANTI-FLOOD AIRBRICK COVER

Double Length – 225mm Height – 150mm

GUARANTEE

2 year manufacturer’s guarantee. Flood Angel Limited cannot be held responsible for incorrect self-installation.

Flood Angel Logo

Sewage backflow causes untold damage, has long-term consequences and means high clean up expenses.

Prevent contamination from sewage and waste water with passive and automatically deployed solutions.

160mm/110mm Non-Return Valve

The Flood Angel® 160mm/110mm Non-Return Valve is the UK’s only adaptable non-return valve that gives the benefit of passive protection due to the integral self-activating flap powered by the flood water.

Under normal operating conditions the Flood Angel® 160mm/110mm Non-Return Valve is fully open allowing solids to flow freely and unrestricted through the valve. In flood conditions when water surges back through the drainage system the gate is automatically deployed by the hydraulic pressure of the water. The gate is sealed against a neoprene gasket and this prevents backflow past the gate.

Inspection and maintenance is made easy with a fully rod-able system and a clear inspection lid. Sewage backflow can cause untold damage resulting in long term consequences and high clean up expenses. This can be prevented using this simple yet effective product.

  • The only product to fit both 160mm & 110mm drainage
  • Flexible collars included for adapting 160mm/110mm drainage
  • Clear inspection cover
  • Fully rod-able
  • Low maintenance
  • Quick to clear in the event of blockage
  • Can be installed in main-drain or branch
  • Normal always-open position allows unrestricted free flow
  • 2 year manufacturer’s guarantee

All locations where flood defence products are installed can be fitted with a telemetry early warning system.

AUTO-CLOSES

The Flood Angel® 160mm/110mm Non-Return Valve uses the power of the flood water to close itself. Once waters subside, the Non-Return Valve opens again.

EASY TO INSTALL

Easy installation and virtually maintenance free.

MAIN or BRANCH

May be installed in main drain or at branch.

INSTRUCTIONS

The Non-Return Valve comes complete with full instructions.

CONSTRUCTION MATERIALS

Body, lid, gate: Acrylonitrile Butadiene Styrene (ABS)

Lid: Polycarbonate

Lid Bolts: Stainless steel

Gate Seal: silicone seal

Lid Gasket: silicone seal

Gate Floats: Closed cell polyethylene

CERTIFICATION AND STANDARDS

Product fulfils the requirements of European Standards EN 13564-1:2002.

Tested to and complies with PAS 1188 – 1:2009 (Tested under witness conditions)

TECHNICAL SPECIFICATIONS

Dimensions: 260mm x 330mm x 600mm (H x W x L)

Weight: 5KGS

Connections: 160mm/110mm

GUARANTEE

2 year manufacturer’s guarantee. Flood Angel Limited cannot be held responsible for incorrect deployment.

Approved* 50mm Backwater Valve

An anti-flooding device protecting interiors from flooding caused by backflow of sewage. Such risk exists most frequently in sanitary drain systems connected to combined and other sewage systems.

The 50mm backwater valve is an ideal anti-flooding device for protecting interiors from flooding caused by backflow of wastewater in all drainage-related systems such as washing basins, kitchen sinks, shower bases and dishwashing machines.

  • The Backwater Valve is a passive flood protection solution
  • Operates fully automatically, no external power supply needed
  • Substitutes an inspection chamber, mounted at sewage system outlet from building
  • Resistant to effects chemicals and to hot wastewaters
  • Permits temporary blocking of wastewater flow (for overhaul works)
  • Maintains full flow capacity of the sewage system
  • Easy to operate and to maintain
  • 2 year manufacturer’s guarantee

Without the protection of a Flood Angel Anti-flood Airbrick Cover, a regular airbrick will allow over 5000 litres of water per hour to enter a property.

All locations where flood defence products are installed can be fitted with a telemetry early warning system.

AUTO-CLOSES

The Backwater Valve uses the power of the flood water to close itself. Once waters subside, the Backwater Valve opens again.

EASY TO INSTALL

Easy installation and virtually maintenance free.

RESISTANT

Resistant to effects chemicals and to hot wastewater.

IDEAL FOR APARTMENTS & OFFICES

An ideal solution where it is impossible to assemble a backwater valve protecting the whole building, e.g. In an apartment block, public utility buildings, industrial premises, hospitals, hotels, offices – both in new systems and modernized ones.

TECHNICAL INFO

Connection diameter – 50mm

Weight – 0.15

Max operating temperature – 95°

Max operating pressure – 0,5 bar

CONSTRUCTION

The product is made of high-quality polypropylene (PP), a very durable material that is mechanically resistant as well as resistant to aggressive effects chemicals and to hot wastewaters.

Cover mounting bolts of chromium-nickel stainless steel of OH18N9 type.

Cover and flap gaskets made of EPDM rubber with improved resistance to weather factors and ageing.

Flow cut-off flap with chrome-nickel guard.

CERTIFICATION

CE Product fulfils the requirements of European Standards EN 13564-1:2002

SIZE

Height – 121mm

Width – 78mm

GUARANTEE

2 year manufacturer’s guarantee. Flood Angel Limited cannot be held responsible for incorrect self-installation.

Approved* Toilet Bung

This simple, inflatable device can be used to minimise sewage backflow through the toilet under flood conditions.

Designed as a general purpose pipe stopper, when fitted in a toilet U bend, this product has been proven to reduce the risk of sewage backflow significantly.

The bung is a strong rubber bag, attached to a hose with a Schrader valve on the end and it is supplied with a hand pump.

  • Cost effective backflow protection
  • Easy and quick to deploy
  • 2 year Flood Angel warrany applies

Without the protection of a Flood Angel Anti-flood Airbrick Cover, a regular airbrick will allow over 5000 litres of water per hour to enter a property.

All locations where flood defence products are installed can be fitted with a telemetry early warning system.

EASY TO INSTALL

The Toilet Bung is quick and very easy to deploy. To use the valve, gently push the deflated bag down into the toilet under the water level, into the U bend at the bottom of the toilet. The hose which is attached to the rubber bag goes under the toilet seat and rests to the side of the toilet. Connect the valve of the hand pump to the valve on the hose and simply pump up the bag until it is totally inflated and firm to the touch, being careful not to over pump. (This works using the same method as pumping up a bicycle tyre). Ensure to remove the pump once inflated.

TECHNICAL INFO

Max inflation pressure: 1.5Bar (15psi)

Max back pressure: 0.75Bar (7.5psi)

Approximate total weight: 0.3kg

CONSTRUCTION

PVC bag

GUARANTEE

2 year Flood Angel warranty applies.

Flood Angel Limited cannot be held responsible for incorrect deployment.

* Manufactured by Horobin

Flood Angel Logo

Flood mitigation solutions for your brickwork, below ground structures and also post-flood clean up.

Our comprehensive range of additional products works to support your overall flood mitigation strategy.

Silicone

Flood Angel® Silicone is a multi-purpose acetoxy curing sealant which provides a watertight, permanently flexible seal. It has excellent adhesion to most substrates, including ceramics, glazed surfaces, aluminium, painted and non-porous surfaces.

The silicone contains a fungicide to prevent mould growth in areas of high humidity.

  • General sealing applications to prevent water ingress.
  • Permanently flexible, forms a watertight rubber seal.
  • For sealing around door apertures and windows, pipes, ducts and general sealing to both inside and outside.

WATERTIGHT FLEXIBLE SEAL

Permanently flexible forms a watertight seal.

OUTDOOR & INDOOR

For sealing around door apertures and windows, pipes, ducts and general sealing to both inside and outside.

PREVENTS MOULD

Contains a fungicide to prevent mould growth in areas of high humidity.

TECHNICAL INFO

A multi-purpose acetoxy curing silicone sealant.

Contains a fungicide to prevent mould growth in areas of high humidity.

USES

For sealing around door apertures and windows, pipes, ducts and general sealing to both inside and outside. Protects walls, apertures, floors and wood from water leaking into joints and causing expensive damage. Also draught-proofs casement windows and doors.

LIMITATIONS

Not suitable for use with aquaria. Not suitable for use on bitumen, asphalt or unprimed metals and some plastics. Over painting is not recommended. Conforms to all parts of BS5889 except clause 9.

HEALTH & SAFETY

Acetic acid is evolved during curing.

Keep out of reach of children.

Irritating to skin and eyes.

In case of contact wash immediately with water and seek medical attention.

Use in well ventilated areas.

Do not take internally.

Wash hands thoroughly after use.

DATA SHEET

Safety data sheet available for professional users on request. Always follow the manufacturer’s recommendations when using this product. It is the users’ responsibility to determine suitability.

APPLICATIONS

Protects walls, apertures, floors and wood from water leaking into joints and causing extensive damage. Also draught-proofs casement windows and doors.

Waterstop

Water repellent concentrate, which, once diluted, can be applied to above ground surfaces such as walls to create a protective waterproof seal.

For use on above ground facade treatments such as: brickwork, cement rendering, asbestos, cement mineral boards, unglazed tiles, cast concrete, roughcast stone work, wood, canvas and leather.

EASY TO APPLY

Spray on, brush on or roll on. Waterstop is easy to apply to surfaces.

SOLVENT FREE

Waterstop is solvent free. Silicone/Siloxane water based. No smell, no fire risk, no waste.

CONCENTRATE

2 Litres of Waterstop makes 25 Litres of usable product.

ECO-FRIENDLY

Waterstop is environmentally friendly and is not a transportation hazard.

COVERAGE

Covers up to 125sqm per 25 Litres of diluted solution dependent on the porosity of the surface.

CONCENTRATE

2 litres makes 25 litres of usable product.

Coverage of up to 125sqm per 25 litres of diluted solution dependent upon porosity of surface.

USES

For use on above ground facade treatments such as:

brickwork, cement rendering, asbestos, cement mineral boards, unglazed tiles, cast concrete, roughcast stone work, wood, canvas and leather.

HEALTH & SAFETY

Acetic acid is evolved during curing.

Keep out of reach of children.

Irritating to skin and eyes.

In case of contact wash immediately with water and seek medical attention.

Use in well ventilated areas.

Do not take internally.

Wash hands thoroughly after use.

Sanitiser

A powerful post flood damage sanitiser and disinfectant concentrate.

For sanitisation of brickwork, plaster, timber joists, floorboards, fixtures and fittings in properties subjected to flood water damage.

WATER SOLUBLE

Water soluble sachets.

CONCENTRATE

1 x 40gm sachet makes 25 litres of usable product.

TECHNICAL INFO

Contains

Quaternary ammonium compounds, benzl-C12-18-alkyldimethyl chlorides plus non-ionic and cationic surfactants.

Approved Sumps & Pumps

The pump and sump system sits below the ground floor to pump out water which enters through the ground. The pump removes water at a faster rate than it can enter. If the pump and sump is located in a protected zone the outlet is routed to an unprotected zone.

The benefit to this method of external installation removes excessive upheaval to the property owners and the subsequent costs caused by internal installation, which would otherwise require the joist to be cut out and supported. External installation allows easy access via a manhole cover, removing the need for large access space through an internal trapdoor and the associated disruption.

The sump and pump system installed externally underground.

No disruption to internal joists.

External installation of the sump and pump system.

Easy external access via manhole cover.